Struggling to get your Rexing V3C dash cam to stay put on your windshield? You’re not alone! Getting that suction cup mount to stick like glue, even through wild temperature swings, can sometimes feel like a real challenge. But trust me, with a few solid tips and a bit of know-how, you can transform your mounting experience from frustrating to fantastic.
The Rexing V3C is a fantastic dash cam, offering dual-channel recording for both the road ahead and your car’s interior. But even the best dash cam needs a reliable mount, and for many, the suction cup mount is the go-to choice because it’s super flexible and you can move it around easily. However, if it’s not installed correctly, or if you’re dealing with extreme weather, it might end up taking an unexpected dive onto your dashboard. That’s why we’re going to walk through everything you need to know about making your Rexing V3C suction cup mount a dependable partner on every drive. From initial setup to keeping it secure for the long haul, we’ll cover it all, so your dash cam stays exactly where it needs to be, recording clear footage without a hitch.
Why Choose a Suction Cup Mount for Your Rexing V3C?
Before we get into the nitty-gritty of installation, let’s talk about why many of us lean towards a suction cup mount for our Rexing V3C or other dash cams. It’s really all about flexibility and ease of use.
Think about it:
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Mastering Your Rexing Latest Discussions & Reviews: |
- Easy to Install and Remove: You can pop it on and off your windshield in a flash, which is super handy if you want to move your Rexing V3C between different cars or simply take it down when you park in a public area for an extended period. No sticky residue left behind, unlike adhesive mounts.
- Repositioning Power: Not happy with the initial placement? No problem! Just release the suction, adjust, and re-apply. This is especially useful when you’re trying to find that perfect angle to avoid glare or to get the best view of the road without obstructing your own vision.
- No Permanent Marks: Unlike some adhesive options that can be a real pain to remove and sometimes leave gunk on your windshield, a well-maintained suction cup mount leaves no trace when you take it off. This is a big plus for those who prefer a non-permanent solution for their vehicle.
However, it’s not all sunshine and rainbows. Suction cup mounts can be a bit finicky. They’re more prone to losing their grip, especially when temperatures outside are really hot or really cold. Plus, they might lead to slightly shakier video if your car hits a lot of bumps, compared to a super-secure adhesive mount. But don’t worry, we’ll tackle those challenges head-on.
Getting to Know Your Rexing V3C Suction Cup Mount
Your Rexing V3C suction cup mount is specifically designed for this model, ensuring a snug fit and optimal performance. While the general principle of suction cups is the same, Rexing often builds in specific features to improve stability and user experience. Mastering Your Rexing V5 & V5C: The Ultimate Guide to Suction Cup Mount Installation & Tips
Typically, a Rexing suction cup mount consists of:
- The Suction Cup: This is the part that creates the vacuum seal against your windshield. It’s usually made of a durable rubber or silicone.
- The Locking Lever/Mechanism: This is what you engage to create the strong vacuum. When you flip it down, it pulls the center of the cup, forcing air out and creating that powerful suction.
- The Dash Cam Connector: This is the specific slot or clip where your Rexing V3C slides in and locks securely. Rexing’s mounts often have an intuitive mounting slot for easy attachment.
- Adjustable Arm/Ball Joint: Most mounts, including the Rexing V3C suction cup mount, have a ball joint that lets you swivel and tilt your dash cam to get the perfect recording angle.
Knowing these parts helps you understand how it all works together, which is key to a solid installation.
Step-by-Step Installation Guide: Making It Stick
Alright, let’s get down to business. Properly installing your Rexing V3C suction cup mount is crucial for its longevity and performance. Don’t just slap it on. a little preparation goes a long way!
Here’s how to do it right: Mastering Your Rexing V3 Suction Cup Mount: Tips, Tricks, and Replacements
Step 1: Pick the Perfect Spot
First things first, find a good location. You want your dash cam to have a clear view of the road without obstructing your driving vision. Many people prefer placing it behind the rearview mirror, slightly to the passenger side. This keeps it discreet and out of your direct line of sight while still capturing everything important. The Rexing V3C mount’s compact design helps maintain clear visibility.
Step 2: Clean, Clean, Clean!
This is arguably the most important step for any suction cup mount. Dirt, dust, grease, or even a thin film from car interior cleaners can break the seal.
- Use a clean, lint-free cloth and some glass cleaner or rubbing alcohol to thoroughly clean the area on your windshield where you plan to attach the mount.
- Wipe it dry completely. Any moisture left behind can also hinder the suction.
- Clean the suction cup itself. Give the rubber part of the suction cup a quick wipe down too. Sometimes they can gather dust from the packaging or being moved around.
Seriously, don’t skimp on this step. A spotless surface is your best friend here.
Step 3: Attach the Mount
Now for the actual sticking:
- Ensure the locking lever is in the “up” or “unlocked” position. This allows the suction cup to be flat against the glass.
- Firmly press the suction cup against the clean windshield. Apply steady, even pressure, especially to the center of the cup. You want to push out as much air as possible.
- While maintaining pressure, flip the locking lever down. You should hear or feel it “click” into place, creating a strong vacuum seal.
Step 4: Check for Stability
Gently try to wiggle the mount. It should feel absolutely secure and not move at all. If it feels loose or moves easily, take it off, re-clean, and try again. Getting Your Rexing Dash Cam Back on Track: A Comprehensive Support Guide
Step 5: Attach Your Rexing V3C
Once the mount is solid, slide your Rexing V3C dash cam onto the mounting slot until it clicks securely into place. Then, adjust the camera’s angle using the ball joint to get the best view. The V3C mount has a convenient knob for adjusting angles.
Step 6: Route Your Cables
Plug in your power cable. Rexing dash cams, including the V3C, often come with long cables designed to be tucked away. Use the included cable management tool if provided to neatly route the power cable along the edge of your windshield, down the A-pillar, and to your car’s power outlet usually the cigarette lighter or a hardwire kit. This keeps your car tidy and prevents cables from obstructing your view.
Optimizing Suction Power: Tips for a Secure Grip
Even with a perfect installation, suction cup mounts can be prone to falling, especially with changes in temperature or prolonged use. Here are some pro tips to keep that Rexing V3C mount stuck firm:
- Temperature Matters: Extreme heat or cold can affect the rubber of the suction cup.
- In hot weather, the rubber can become pliable and lose its grip. Try installing it when your car’s interior is cool, or even leave your AC running for a bit to cool the windshield. If the cup has lost its shape over time due to heat, soaking just the rubber part in warm or boiling water for 10-15 seconds can help soften it and restore its original form, making it stick better.
- In cold weather, the rubber can stiffen and prevent a good seal. Warm the suction cup slightly you can hold it in your hands for a minute or two or bring it indoors before installing before applying it to a clean, room-temperature windshield.
- A Tiny Bit of Moisture Carefully!: Some users find that a single, tiny drop of water not a whole wet surface! on the suction cup before applying it can sometimes help create a better seal, acting as a lubricant to remove all air. However, be cautious with this, as too much moisture can actually make it worse.
- Silicone Grease Trick: For a truly stubborn mount, a very thin, almost invisible layer of silicone grease like the kind used for O-rings or plumbing on the edge of the suction cup can work wonders. This helps fill any microscopic imperfections and creates a tighter seal, making it more resistant to temperature changes. Make sure it’s silicone grease, not petroleum jelly, which can degrade rubber.
- Avoid Direct Sunlight When Parked: If possible, when your car is parked for a long time, especially in hot climates, try to position a sunshade to protect the dash cam and its mount from direct, intense sunlight. Prolonged UV exposure and heat can degrade the rubber over time.
- Regular Checks: Make it a habit to check your mount’s stability every now and then. Over time, suction can weaken. If you notice it starting to lose its grip, it’s a good idea to remove it, re-clean the surface and the cup, and reattach it.
Grab 50% OFF on RexingUSA.com Getting to Know the Rexing S300 Dash Cam
Common Issues and Troubleshooting Your Rexing Suction Cup Mount
Even with the best intentions, things can go wrong. Here are some common problems you might face with your Rexing dash cam suction cup mount and how to fix them:
Problem: My Dash Cam Keeps Falling Off!
This is probably the most frequent complaint about suction cup mounts.
- Solution 1: Re-Clean Everything Thoroughly!: As mentioned, a dirty surface is the number one culprit. Take the mount off, clean both the windshield and the suction cup with glass cleaner or rubbing alcohol, and dry them completely.
- Solution 2: Condition the Suction Cup: If the rubber has become hard or deformed often from heat, try the warm water trick. Immerse just the rubber part of the suction cup in warm or boiling water for 10-15 seconds to soften it, then dry and reapply.
- Solution 3: Apply Silicone Grease: A tiny bit of silicone grease can improve the seal, especially if the rubber is a bit old or has microscopic imperfections.
- Solution 4: Check for Air Leaks: Make sure the locking lever is fully engaged. Sometimes it might look locked but isn’t quite secure, allowing air to seep in.
- Solution 5: Consider a New Mount: If your suction cup mount is really old, or if the rubber is cracked or permanently deformed, it might be time for a replacement. Even the best tips can’t fix damaged material.
Problem: The Suction Cup Leaves a Ring/Mark on My Windshield
This isn’t really a “problem” with functionality, but it can be annoying.
- Solution: Clean with Rubbing Alcohol: A quick wipe with rubbing alcohol or a good glass cleaner should remove any temporary marks. If it’s a more persistent ring, it might be residue from a product you used or simply dirt that accumulated around the edge of the mount.
Problem: My Footage Is Shaky/Vibrating
While not directly a suction problem, a less-than-perfectly-secured mount can contribute to shaky footage.
- Solution 1: Ensure Tightness: Make sure the dash cam is securely clicked into the mount, and any adjustable knobs on the mount itself for the ball joint, for example are tightened down.
- Solution 2: Re-evaluate Mount Stability: If the mount itself isn’t perfectly stable even if it’s “stuck”, it can introduce vibrations. Re-install it, making sure it’s absolutely firm against the glass.
- Solution 3: Consider an Adhesive Mount: If you consistently get shaky footage with a suction cup, and stability is paramount, an adhesive mount might be a better long-term solution, as they generally offer a more stable, semi-permanent setup.
Grab 50% OFF on RexingUSA.com Rexing Sim Racing Wheel: Your Ultimate Guide to High-End Immersion
Maintenance for Longevity: Keeping Your Mount in Top Shape
Just like any car accessory, a little care can significantly extend the life of your Rexing V3C suction cup mount.
- Periodic Cleaning: Every few months, or whenever you notice the suction weakening, remove the mount. Clean both the windshield area and the suction cup itself thoroughly. This prevents dust and grime from building up and compromising the seal.
- Inspect the Rubber: Regularly check the suction cup’s rubber for any signs of cracking, hardening, or permanent deformation. If it’s looking worn, it’s likely time for a replacement.
- Store Properly If Removed: If you frequently remove your dash cam and mount, try to store the mount in a cool, dry place where the suction cup won’t get bent or compressed for long periods. You can even keep the clear plastic protector if it came with one on the suction cup to maintain its shape.
Comparing Rexing Mounts: V3C vs. V3, V5, V1, and Others
Rexing offers a variety of dash cams, and it’s important to know that their mounts, particularly suction cup mounts, are often model-specific. You can’t just grab any Rexing suction cup mount and expect it to fit your V3C.
- Rexing V3C Suction Cup Mount: This is specifically designed for the V3C model. It’s built to hold the V3C securely and prevent camera shake.
- Rexing V3 Suction Cup Mount and V3 Basic, V33: There’s a dedicated suction cup mount for these models. It’s explicitly stated as not compatible with V1, V1P, V5, and other series. This means the connector slot is different.
- Rexing V5 Suction Cup Mount and V5C: Similar to the V3C, the V5 and V5C models have their own specific suction cup mount.
- Rexing V1 Mount and V1 Basic, V1-4K, V1P-4K: These V1 series cameras typically come with a suction cup mount as an option, which many users prefer over the adhesive mount that often comes standard. However, this mount is not compatible with the V3, V3 Basic, or V5 models.
The key takeaway here is to always double-check the compatibility when purchasing a replacement or additional mount. Rexing clearly labels which mount works with which dash cam series. Trying to force an incompatible mount can damage your dash cam or lead to an unstable setup.
Grab 50% OFF on RexingUSA.com The Ultimate Guide to the Rexing S1 Pro 1080p Dash Cam
When to Consider Alternatives to Your Rexing V3C Suction Cup Mount
While suction cup mounts offer great convenience, there are situations where you might want to consider other options, especially if you’re experiencing persistent issues or have specific needs.
- Adhesive Mounts: These are often the most stable option. Rexing provides adhesive mounts for most of its dash cams, including the V3C though it generally comes with 3M tape for the mount, not a suction cup by default in some packages. They offer a more permanent solution, are less prone to falling off in extreme temperatures, and generally provide less shaky footage. The downside is they’re harder to reposition and can leave residue if not removed carefully. If you live in a really hot climate or want a “set it and forget it” solution, a Rexing adhesive mount might be a better fit. Many Rexing V1 users actually seek out the suction cup mount because the adhesive struggled in heat.
- Rearview Mirror Mounts: Some universal dash cam mounts clip onto your rearview mirror, keeping the dash cam tucked away and often more stable. This might be an option if you find windshield placement too distracting or if suction cups just aren’t working for your specific vehicle.
- Dashboard Mounts: Less common for dash cams, but some mounts attach to the dashboard itself. However, this can obstruct vision or be more visible, so it’s usually less ideal for front-facing dash cams.
Ultimately, the best mount for you depends on your personal preferences, your driving environment, and how often you need to remove or reposition your dash cam. For the Rexing V3C, the dedicated suction cup mount is a solid choice for flexibility, but knowing its limitations and alternatives is always a good idea.
Real-World Experience and Tips
From countless hours on the road with various dash cams, here’s some practical advice that goes beyond the manual:
- Don’t Over-Tighten: While you want the suction cup to be firm, you don’t need to apply excessive force when pressing it or locking the lever. Just enough to create a solid vacuum. Overdoing it can sometimes distort the rubber or stress the plastic components of the mount.
- Placement is Key to Discretion: For a cleaner look and to avoid driver distraction, really spend time finding that sweet spot behind your rearview mirror. A compact mount like the Rexing V3C’s helps here. A higher placement can also make cable routing easier to conceal along the headliner and A-pillar.
- Test Drive It: After installation, take your car for a short drive, especially over some bumpy roads if you can. This is the best way to see if the mount holds up to real-world vibrations and conditions. Better for it to fall in your driveway than on the highway!
- Consider a Hardwire Kit for Parking Mode: While not mount-related, if you’re using your Rexing V3C’s parking mode, consider investing in a hardwire kit. This provides continuous power even when your car is off, without draining your battery, and frees up your cigarette lighter port. It also often leads to an even cleaner installation with no visible wires once it’s all tucked away.
By following these tips and understanding the nuances of your Rexing V3C suction cup mount, you’ll be well on your way to a secure, reliable, and hassle-free dash cam experience. Rexing S1 Pro Enhanced Dash Cam: Your Ultimate Guide to On-Road Security
Frequently Asked Questions
What should I do if my Rexing V3C suction cup mount keeps falling off in hot weather?
Hot weather can cause the rubber of the suction cup to become more pliable, reducing its grip. First, thoroughly clean both the windshield and the suction cup with glass cleaner or rubbing alcohol and dry completely. You can also try softening just the rubber part of the suction cup by soaking it in warm water for about 10-15 seconds, then drying it and reapplying it to the windshield. For extra security, a very thin layer of silicone grease on the edge of the cup can help maintain the seal.
Is the Rexing V3C suction cup mount compatible with other Rexing dash cam models like the V1 or V5?
No, the Rexing V3C suction cup mount is specifically designed for the V3C model and is generally not compatible with other Rexing dash cams like the V1, V3, V5, or other series. Rexing mounts are often model-specific due to variations in the camera attachment mechanism. Always check the product description for compatibility before purchasing a mount.
How often should I clean my suction cup mount and windshield?
It’s a good practice to clean the windshield area and the suction cup every few months, or whenever you notice the mount starting to lose its grip. Dust, dirt, and oils can build up over time and prevent a strong vacuum seal. A thorough cleaning can usually restore its holding power.
Can I use super glue or other strong adhesives if my suction cup mount won’t stick?
Using super glue or permanent adhesives on your suction cup mount is generally not recommended. This will make the mount permanent and defeat the purpose of a removable suction cup. More importantly, it can damage your windshield or the dash cam itself, and make it impossible to reposition or remove without causing damage. If your suction cup mount is no longer reliable, it’s best to try the troubleshooting steps mentioned or purchase a new, compatible Rexing suction cup mount. Unlocking the Road Ahead: Your Guide to the Rexing S1 Pro Enhanced Dash Cam
What’s the best way to remove my Rexing V3C suction cup mount without damaging the windshield?
To remove your suction cup mount, simply release the locking lever first. This will break the vacuum seal, and you should then be able to gently pull the mount away from the windshield. Avoid yanking it off forcefully without releasing the lever, as this can potentially stress the glass or damage the suction cup.
Leave a Reply