Master Your Rexing V1 FHD Dash Cam: The Ultimate User Guide & Troubleshooting Tips

To really get the most out of your Rexing V1 FHD dash cam, you’ll want to familiarize yourself with its basic operations and key settings. Many folks just plug it in and go, but taking a few minutes to understand the manual will save you a lot of headaches and ensure your dash cam is ready when you truly need it. Think of your dash cam as a silent witness on the road. you want to make sure it’s recording exactly what you need, reliably and clearly. The Rexing V1 FHD is a popular choice for its Full HD recording and a wide 170-degree field of view, giving you a really comprehensive look at the road ahead. It’s a solid, reliable device, but like any tech, a little know-how goes a long way. This guide will walk you through everything, from getting it set up to tweaking advanced settings and even troubleshooting common snags, so you can drive with confidence.

Grab 50% OFF on RexingUSA.com

Getting Started: Unboxing & Initial Setup

you’ve got your new Rexing V1 FHD in hand. It’s pretty exciting, right? Before you hit the road, let’s get this little guardian installed and ready to roll.

What’s in the Box?

Usually, when you unbox your Rexing V1 FHD, you’ll find a few essentials:

• The Rexing V1 FHD Dash Cam itself.
• A car charger often a generous 12ft long, which is super handy for routing cables.
• A 3M adhesive mount way more secure than those suction cups that tend to fall off in extreme temperatures.
• A USB cable.
• A quick start guide and the full user manual.
• Sometimes, even a 32GB SD card, a cable management tool, and clips are included.

Installation: Mounting and Powering Up

Installing your dash cam might seem a bit daunting, but it’s actually pretty straightforward. You’re aiming for a discreet setup that doesn’t block your view, usually behind your rearview mirror.

0.0 0.0 out of 5 stars (based on 0 reviews) Excellent0% Very good0% Average0% Poor0% Terrible0% There are no reviews yet. Be the first one to write one. Your review Your overall rating Select a Rating5 Stars4 Stars3 Stars2 Stars1 Star Title of your review Your review Your name Your email This review is based on my own experience and is my genuine opinion. ​ Submit Review

Amazon.com: Check Amazon for Master Your Rexing Latest Discussions & Reviews:

1. Clean Your Windshield: First things first, make sure the spot where you plan to mount it is super clean. Any dust or grime can mess with the adhesive.
2. Apply Electrostatic Sticker Optional but Recommended: Some kits come with an electrostatic sticker. Apply this to the cleaned windshield first. It protects your windshield from the adhesive and makes it easier to remove the mount later if you need to.
3. Attach the Mount Plate: Peel the backing off the 3M adhesive pad and firmly press the mount onto the electrostatic sticker or directly onto the windshield. Here’s a crucial tip: give the adhesive at least 20 minutes or even a few hours, or overnight if you have time to properly set before you attach the camera. This helps create a really strong bond, especially in varying temperatures.
4. Insert the Memory Card: Power off the dash cam first. The Rexing V1 FHD uses a Micro SD card, and for reliable performance, you’ll want a Class 10/UHS-3 or higher card, up to 256GB. Some users on Reddit swear by specific brands like Kingston Canvas Go Plus, recommending against certain SanDisk Ultra cards due to reliability concerns. Gently push the card into the slot until you hear a click. If you’re struggling, try using a coin to push it in completely.
5. Mount the Camera: Once the adhesive is secure, slide the dash cam onto the mount. You’ll usually hear a satisfying click when it’s in place. The Rexing V1 is designed to be low-profile, so it tucks away nicely. You can even adjust the lens angle manually from underneath the camera.
6. Connect Power & Route Cables: Connect the mini-USB end of the car charger to the dash cam’s mini-USB port. Now, this is where that long cable comes in handy. You can easily route the power cable along your headliner, down the A-pillar, and tuck it into the trim, leading it to your vehicle’s 12V cigarette lighter or accessory socket. This keeps your setup clean and tidy. The camera is designed to be connected to a power source while recording, as its internal battery is mainly for emergency file saving.
7. Initial Power-On & Formatting: Once plugged in, the camera should automatically power on and start recording when your car starts. But before you go anywhere, you must format the memory card within the camera itself. This ensures the camera records properly and avoids errors. To do this, stop recording press the REC button, then go into the menu settings we’ll cover that next.

Grab 50% OFF on RexingUSA.com

Getting to Know Your Dash Cam: Buttons and Menu Navigation

Understanding the buttons and how to navigate the menus is key to customizing your Rexing V1 FHD. It might feel a bit clunky at first, as some reviews point out, but it gets easier quickly. Unlocking Your Rexing V5 Dash Cam: A Hands-On Guide to its Manual and Beyond

Camera Overview: The Buttons

Your Rexing V1 FHD usually has these buttons:

• Power Button: To manually turn the device on or off hold for a few seconds.
• Menu Button: Your gateway to settings.
• Mode Button: Toggles between video recording, photo, and playback modes.
• REC Record Button: Starts and stops video recording, also acts as an “Up” navigation button in menus.
• OK Confirm Button: Confirms selections in menus, and can lock video clips during recording.
• MIC Microphone Button: Toggles audio recording on/off, also acts as a “Down” navigation button in menus.
• Screen Button: Toggles the LCD display on or off to save power or for a less distracting drive.
• Reset Button: A tiny button for when things go completely haywire you’ll need a paperclip or sim tool to press this.
• Lens Angle Adjustment: A physical knob or mechanism on the side to tilt the lens.

Navigating the Menus

This is a common question, and it’s simpler than you might think:

1. Stop Recording: First, ensure your dash cam isn’t actively recording. If it is, press the REC button to stop. You can’t enter the menu while it’s recording.
2. Enter Menu:
   • Press the MENU button once to enter the settings for the current mode e.g., video settings if you’re in video mode.
   • Press the MENU button twice to enter the System Settings this is where you’ll find general device settings like date/time, format, and firmware version.
3. Navigate: Use the REC button to move up and the MIC button to move down through the options.
4. Select/Confirm: Press the OK button to select an option or confirm a setting.
5. Exit: To exit the menu, press the MENU button again.

Grab 50% OFF on RexingUSA.com

Essential Settings & Features

Now that you know how to navigate, let’s look at some critical settings.

Formatting the Memory Card

Seriously, do this first and then regularly, like once a month. It’s crucial for the dash cam to write files correctly and avoid errors. Your Complete Guide to Rexing V33 Plus Installation: Front, Cabin, Rear & Hardwire!

1. Stop any recording press REC.
2. Press MENU twice to enter System Settings.
3. Use REC/MIC buttons to find “Format”.
4. Press OK to select.
5. Confirm by pressing OK again you’ll be warned that all data will be deleted, so back up anything important first!.
6. The camera will shut down after a few seconds, then you can disconnect it from power.

Loop Recording

This is a core feature for dash cams. It means your dash cam records continuously in short segments e.g., 1, 3, or 5 minutes. When the memory card fills up, it automatically overwrites the oldest unlocked footage, so you never run out of space. Make sure this is turned ON. Many users prefer 3-minute clips for easier file management.

G-Sensor Gravity Sensing

The G-Sensor detects sudden impacts or changes in motion, like a collision. When triggered, it automatically locks the current recording and sometimes the previous and next segments, preventing it from being overwritten by loop recording. This footage becomes vital evidence. You can usually set the sensitivity Low, Medium, High. For general driving, medium is usually fine, but if you find too many “locked” files from bumps, you might want to adjust it.

Parking Monitor / Motion Detection

These features protect your car even when it’s parked.

• Parking Monitor: If your dash cam has a super-capacitor like the Rexing V1 and detects an impact while parked, it can jolt awake and start recording.
• Motion Detection: This feature activates recording when motion is detected in front of the car.
• Important Note: For continuous parking mode recording that lasts longer than a few seconds, you’ll generally need a Rexing Intelligent Hardwire Kit sold separately. Otherwise, the internal battery is very limited. Also, if you use a parking monitor, Rexing recommends setting the G-Sensor sensitivity to high, but if you don’t use parking mode, keep it low to avoid too many locked files filling up your card.

Video Resolution

The Rexing V1 FHD records in 1080p Full HD. You might have options for lower resolutions like 720p, WVGA, or VGA. While lower resolutions save space, it’s best to stick with 1080p for the clearest footage, especially for details like license plates.

Wide Dynamic Range WDR

WDR helps the camera handle situations with extreme lighting contrast, like driving out of a tunnel or facing a bright sunset. It balances bright and dark areas in the video to ensure more details are visible. It’s usually best to keep this on. Your Ultimate Guide to the Rexing V5 Dash Cam

Time-Lapse Record

Some Rexing V1 models offer time-lapse recording, which can be fun for capturing long drives in a condensed format.

Audio Recording

You can turn the microphone on or off. Simply press the MIC button during recording to toggle it. Many people keep audio on for a full record of events, but you have the choice.

Screen Saver

To avoid distractions while driving, you can set the screen saver to turn off the LCD display after a certain period e.g., 30 seconds, 1 minute, 2 minutes. The camera will still be recording.

GPS Logger Optional

If you have a separate Rexing GPS Logger, you can plug it into your V1 FHD. This external module records your vehicle’s speed and location, which can be viewed during playback using a specialized GPS video player on your computer. The screen icon will change from blue to green when a GPS signal is found.

Grab 50% OFF on RexingUSA.com Rexing v33

Reviewing Your Footage

So, you’ve captured some moments on the road, now what? There are a couple of ways to review your videos.

On the Device

1. Stop Recording: Press the REC button if it’s currently recording.
2. Enter Playback Mode: Press the MODE button until you see the playback icon usually a triangle.
3. Navigate Files: Use the REC up and MIC down buttons to scroll through your recorded videos and photos.
4. Play/Pause: Press the OK button to play a selected video. During playback, you can often use OK to pause, MIC to fast forward, and REC to rewind.
5. Delete: To delete a specific file, select it in Playback Mode, press the MENU button once, and choose the “Delete” option.

On a Computer

This is often the best way to view footage clearly and save important files.

1. Remove SD Card: Power off your dash cam and carefully remove the Micro SD card.
2. Insert into Computer: Use an SD card adapter or a dedicated Micro SD card reader to insert the card into your computer.
3. Access Files: The card should appear as a removable drive. Open it, and you’ll typically find your video files in a folder often named something like “Movie” or “DCIM”. Locked files, triggered by the G-Sensor, are usually in a separate folder to prevent overwriting.
4. GPS Playback if applicable: If you use a GPS Logger, you’ll need Rexing’s specialized GPS Video Player software available on their website to view the GPS data alongside your video.

Grab 50% OFF on RexingUSA.com

Troubleshooting Common Issues

Even the best dash cams can hit a snag sometimes. Here’s how to deal with some common Rexing V1 FHD problems.

Dash Cam Stops Recording / Memory Card Issues

This is a frequent complaint. Rexing V1P: Your Ultimate Guide to Choosing, Installing, and Mastering Your Dash Cam

• Check Loop Recording: Make sure loop recording is turned ON in the settings.
• Format Regularly: If you haven’t formatted your card in a while, it might be full of locked files or corrupted. Format it!
• Memory Card Compatibility: Not all SD cards are created equal. Rexing recommends Class 10/UHS-3 or higher Micro SD cards up to 256GB. Some users report issues with SanDisk Ultra cards and suggest higher-performance options like Kingston Canvas Go Plus. A “normal SD card WILL NOT CUT IT for the kind of uptime this thing requires!”.
• Faulty Card: If problems persist after formatting, try a different, high-quality memory card.
• Power Interruption: An unstable power connection or faulty charging cable can also cause recording to stop.

Dash Cam Keeps Rebooting / Turns On and Off

This usually points to a power or battery issue.

• Power Source: The internal battery in the Rexing V1 is a super-capacitor, primarily for emergency shutdowns, not continuous power. Ensure your dash cam is constantly connected to a stable 12V power source via the included car charger or a hardwire kit.
• Charging Cable: A damaged or incompatible charging cable can cause issues. Try a different Rexing-approved charger.
• Depleted Internal Battery: While it’s not for power, a severely depleted internal battery might affect stability. If you suspect this, try using a different power source.
• Firmware: In some rare cases, incorrect or old firmware can cause reboots.

Screen is Black but Buttons are Lit

This could indicate a firmware issue. Updating the firmware as described below might resolve it.

Hazy Images

If your footage suddenly looks blurry or hazy, first check the lens!

• Clean the Lens: Carefully clean the lens with a microfiber cloth to remove dust or fingerprints.
• Protective Film: Make sure any protective film on the lens has been removed.

Grab 50% OFF on RexingUSA.com

Keeping It Fresh: Firmware Updates

Firmware updates can bring bug fixes, improve performance, and sometimes even add new features. Rexing recommends updating firmware only if you’re experiencing issues. Understanding Rexing USA: What’s the Deal with Their Dash Cams?

Here’s a general guide for updating your Rexing V1 FHD firmware:

1. Backup & Format: The first step is to always format your memory card using the dash cam’s format function. This clears all files, so back up anything important beforehand.
2. Check Current Firmware Version: It’s a good idea to note your current firmware version usually found in the System Settings under “Version”. This helps ensure you download the correct update.
3. Download Firmware:
   • Remove the formatted SD card from your dash cam and insert it into your computer.
   • Go to RexingUSA’s support website rexingusa.com/support/firmware-tool/ to find the correct firmware for your V1 FHD model.
   • Download the firmware file it’s usually a .zip file containing a .bin file.
   • Unzip the downloaded file.
4. Transfer Firmware: Copy the .bin firmware file and any accompanying image files like logo.jpg or logo2.jpg directly to the root directory of your Micro SD card. This means not putting it inside any folders on the card.
5. Install Firmware:
   • Safely eject the SD card from your computer.
   • With your dash cam powered OFF, insert the SD card back into the camera.
   • Connect the dash cam to a power source your car charger.
   • The update should start automatically. The screen might stay off, but the status light will usually be active for up to a minute while it updates.
6. Post-Update Cleanup: This is super important! After the update is complete, you must format the memory card again using the dash cam’s function. If you skip this, the camera will try to reinstall the firmware every time it powers on.
7. Reboot & Verify: Power down the dash cam hold the power button, then power it back on. Check the firmware version in the settings to confirm it updated correctly.

Important Tips for Firmware Updates:

• Always use a high-quality Micro SD card.
• Ensure a stable power source during the update.
• Do not remove the memory card or disconnect power during the update process.
• Installing incorrect firmware can damage your device. Always download from official sources.

Grab 50% OFF on RexingUSA.com

Maintenance Tips for Longevity

A little care can help your Rexing V1 FHD last longer.

• Regular Formatting: As mentioned, format your SD card at least once a month.
• Clean the Lens: Keep the lens clean from dust and smudges for clear recordings.
• Check Cable Connections: Make sure all cables are securely plugged in.
• Extreme Temperatures: While the V1 is designed to handle a good range e.g., -20°F to 176°F for operation, it’s generally a good idea to remove the dash cam from the windshield when parking in extreme heat to prolong its life.

By understanding these features and following these steps, you’ll be well-equipped to use your Rexing V1 FHD to its full potential, ensuring it reliably captures your journeys and provides peace of mind on the road. Unlock Major Savings: Your Ultimate Guide to Rexing USA Coupons and Discount Codes

---

Grab 50% OFF on RexingUSA.com

Frequently Asked Questions

What kind of memory card does the Rexing V1 FHD use?

The Rexing V1 FHD requires a Micro SD card. For optimal performance and to avoid recording errors, it’s crucial to use a Class 10/UHS-3 or higher speed rating. The dash cam supports cards with capacities up to 256GB. Many users find that “high endurance” cards are more reliable for the continuous write cycles of a dash cam.

How do I format the SD card in my Rexing V1 FHD?

To format the SD card, first, stop any active recording by pressing the REC button. Then, press the MENU button twice to access the System Settings. Use the REC and MIC buttons to navigate to the “Format” option, then press OK to select and confirm. Remember to back up any important files before formatting, as it will erase all data.

Why does my Rexing V1 FHD keep turning on and off or rebooting?

This issue is often related to power supply or the memory card. The Rexing V1 FHD is designed to operate while continuously powered by your vehicle’s 12V outlet. Ensure your car charger is securely connected and isn’t faulty. If the problem persists, try formatting your memory card or using a different, high-quality Micro SD card, as incompatible or corrupted cards can cause instability. In some cases, a firmware issue might be the culprit.

How do I access the menu settings on my Rexing V1 FHD?

To get into the menu, you first need to stop the dash cam from recording by pressing the REC button. Once recording has stopped, you can press the MENU button once to enter the settings specific to the current mode e.g., video settings if you’re in video mode, or press the MENU button twice to access the broader System Settings. Use the REC and MIC buttons to navigate and OK to select. Tesla Charging Extension Cables: Your Complete Guide

Can I view footage from my Rexing V1 FHD on my phone?

Yes, some Rexing V1 models like the original V1 do have built-in Wi-Fi, allowing you to transfer video clips wirelessly to your smartphone or tablet using an app interface for iOS and Android. This is super convenient for sharing footage quickly. Check your specific model’s specifications or manual to confirm Wi-Fi capability.

What is the G-Sensor and how does it work?

The G-Sensor, or Gravity Sensor, is a crucial safety feature that detects sudden movements, impacts, or rapid deceleration like during a collision or accident. When triggered, the dash cam automatically locks the current video file, preventing it from being overwritten by the loop recording function. This ensures that critical evidence is preserved. You can adjust the sensitivity Low, Medium, High in the settings.

How do I update the firmware on my Rexing V1 FHD?

Updating the firmware involves a few steps: First, format your SD card using the dash cam. Then, download the correct firmware file .bin from the official RexingUSA support website to the root directory of your SD card via a computer. Power off your dash cam, insert the card, and then power the dash cam on by connecting it to your car charger. The update should proceed automatically, with the screen potentially remaining off while the status light blinks. After the update, it’s vital to format the SD card again to prevent the firmware from reinstalling every time you power on the device.

Rexing Type-C Intelligent Hardwire Kit: Your Ultimate Guide to 24/7 Dash Cam Protection