If you’re wondering how to make your Rexing V1 dash cam reliably capture every moment on the road without constantly emptying its memory card, then setting up Rexing V1 loop recording is where you want to focus your attention. It’s truly the “set it and forget it” feature that gives you peace of mind while driving. This guide will walk you through exactly what loop recording is, how it works on your Rexing V1, and how to optimize it so you’re always covered. You’ll learn that getting this right means your dash cam acts like a silent witness, continuously recording over old footage to make space for new, but intelligently protecting those critical moments you actually need.
Think of it like this: your Rexing V1 is there to keep an eye out for you, and loop recording is the engine that keeps that surveillance going, ensuring you have a continuous video record without ever having to manually delete files. It’s a must for anyone who wants a hassle-free experience with their dash cam, letting you focus on the drive knowing your camera has your back.
Understanding Loop Recording: Your Dash Cam’s Best Friend
So, what exactly is loop recording, and why is it such a big deal for your Rexing V1 dash cam? Simply put, it’s the ingenious feature that allows your dash cam to record continuously, even when its memory card is full. Without loop recording, your dash cam would just stop recording once the SD card runs out of space, which kind of defeats the whole purpose of having a dash cam, right?
Here’s how it works: When enabled, your Rexing V1 breaks down its continuous video footage into shorter, manageable segments. You typically get options like 1, 3, or sometimes 5-minute clips. Once your microSD card fills up with these video files, the dash cam doesn’t stop. Instead, it starts overwriting the oldest unlocked video segments with the newest ones. This process happens automatically and seamlessly, without you needing to lift a finger.
|
0.0 out of 5 stars (based on 0 reviews)
There are no reviews yet. Be the first one to write one. |
Amazon.com:
Check Amazon for Rexing V1 Loop Latest Discussions & Reviews: |
For example, if you set your loop recording to 3 minutes, a 30-minute drive won’t be one giant file. It’ll be ten 3-minute clips. When the card eventually gets full, your Rexing V1 will start deleting the oldest 3-minute clip to make room for the new one it’s recording. This continuous cycle ensures that your dash cam always has the most recent footage available, which is exactly what you want in case of an incident.
Beyond just keeping your recording going, breaking video into segments makes a huge difference when you need to review footage. Imagine trying to find a critical 30-second event in a single 8-hour file – that would be a nightmare! With shorter clips, it’s way easier to pinpoint the exact moment you need, and file transfers are quicker too.
Grab 50% OFF on RexingUSA.com Unlock More with Rexing: Your Essential Guide to Product Registration
Getting Your Rexing V1 Set Up for Optimal Loop Recording
Setting up loop recording on your Rexing V1 is pretty straightforward, but getting it just right can make a big difference in how effectively your dash cam works for you.
Accessing the Menu
First things first, you can’t change settings while your Rexing V1 is actively recording. So, if you see that little red blinking light on the top left of your screen, hit the REC button to stop recording.
Once recording is stopped, press the MENU button on the left side of your dash cam. You’ll likely see the “Video Menu” first. Press the MENU button again, and it should take you to the “System Settings” or the main setup menu. From there, you can navigate through the options using the UP and DOWN arrow buttons often labeled REC and MIC.
Choosing Your Loop Recording Time
When you scroll through the video settings, you’ll find the “Loop Recording” option. On most Rexing V1 models, you’ll usually see choices like “Off,” “1 Minute,” “2 Minutes,” or “3 Minutes.” Some dash cams might even offer 5 or 10-minute options, but 3 minutes is often a sweet spot for Rexing V1.
Rexing often recommends setting loop recording to 3 minutes. Why? It balances having enough continuous footage for context while keeping individual file sizes manageable. If you choose 1-minute segments, you’ll end up with a lot more files to sort through, but they are easier to download and transfer. Longer segments, like 3 minutes, give you a smoother playback experience and less file management. It really comes down to your preference and how you plan to use the footage. What is a J1772 Adapter? Your Essential Guide to EV Charging
To set it, simply highlight your desired duration e.g., “3 Minutes” and press the OK button to confirm. After that, you can exit the menu, and your dash cam will resume recording with your new loop recording setting.
Beyond the Loop: Protecting Critical Footage
While loop recording is fantastic for continuous coverage, there are some moments you absolutely don’t want overwritten. That’s where features like the G-sensor, parking monitor, and manual lock come into play.
The G-Sensor: Your Automatic Accident Detector
The G-sensor short for Gravity Sensor is like your dash cam’s built-in bodyguard. It’s an accelerometer that constantly monitors for sudden changes in motion or impact, such as hard braking, sharp turns, or, crucially, a collision.
When the G-sensor detects a significant impact, it automatically triggers your Rexing V1 to lock the current video file. This means the footage from before, during, and immediately after the event is moved to a special “emergency” folder on your SD card and protected from being overwritten by the loop recording feature. These locked videos are often found in a directory like \CARDV\MOVIE\RO on your memory card. Does tesla come with j1772 adapter
Most dash cams, including the Rexing V1, let you adjust the G-sensor’s sensitivity usually Low, Medium, High, or Off.
- Low Sensitivity: Great for smoother drives, like on highways. It prevents unnecessary triggers from minor bumps.
- Medium Sensitivity: A good all-around setting for most daily driving, striking a balance between capturing important events and avoiding false alarms.
- High Sensitivity: Useful if you drive on particularly rough roads or want to capture even the slightest jolt. However, be aware that this can lead to many “locked” files, quickly filling up your SD card with non-critical events.
It’s a good idea to experiment with the sensitivity to find what works best for your driving style and typical road conditions. You want it sensitive enough to catch genuine incidents but not so sensitive that every pothole or gentle door close locks a video.
Parking Monitor: Recording When You’re Away
What about when you’re parked? Your car isn’t immune to bumps or incidents when you’re not in it. That’s where the Parking Monitor feature comes in. When enabled, your Rexing V1 can activate and record even when your vehicle is off.
For this feature to work continuously, your Rexing V1 needs a constant power source. This usually means installing a hardwire kit sold separately. This kit connects your dash cam directly to your car’s fuse box, allowing it to draw power without draining your car’s main battery excessively. Many hardwire kits also have low-voltage protection, automatically shutting down the dash cam if your car battery drops below a certain voltage e.g., 11.6V to prevent it from going completely flat.
Rexing typically offers two main modes for parking surveillance: Who is Jason Rexilius? A Modern Architect of Innovation
- G-Sensor Mode: Similar to the driving G-sensor, this mode keeps the camera in a low-power state and only activates and records usually a 20-second clip if it detects an impact to your parked vehicle. This is great for conserving battery.
- Time-Lapse Mode: In this mode, the camera continuously records at a very low frame rate, condensing hours of footage into minutes. This provides a comprehensive record of everything that happens around your car, not just impacts, in a space-saving format.
You’ll find the “Parking Monitor” setting in your Rexing V1’s video menu. If you’ve got a hardwire kit installed and the feature isn’t appearing or working, sometimes a firmware update might be necessary.
Manually Locking Videos: When You See Something Important
Sometimes, you witness something on the road that isn’t a collision but is definitely worth saving—maybe a road rage incident, an interesting event, or even just a funny moment. For these situations, your Rexing V1 allows you to manually lock the current video clip.
While your dash cam is recording, simply press the OK button. You’ll usually see a key symbol appear on the screen, indicating that the current clip is now locked. This action tells the dash cam to protect that specific video segment, moving it to the emergency folder often \CARDV\MOVIE\RO and ensuring it won’t be overwritten by the loop recording function. It’s a quick and easy way to safeguard footage that might be crucial later on.
The Unsung Hero: Your SD Card and Loop Recording
You can have all the best dash cam features, but if your microSD card isn’t up to snuff, your loop recording experience will suffer. The SD card is truly the unsung hero, constantly writing and overwriting data. Rexing Motorized Wireless Charging Car Mount: Your Ultimate Road Companion
Why a Good SD Card is Non-Negotiable
Dash cams put a lot of stress on memory cards. They’re constantly recording, deleting, and re-recording high-definition video, sometimes for hours on end, often in extreme temperatures inside a car. This is a very different workload than, say, a smartphone camera that records short bursts. Because of this, you can’t just use any old microSD card. you need one built for endurance.
A low-quality or slow SD card can lead to all sorts of problems:
- Skipped recordings or gaps in footage.
- Dash cam freezing or locking up.
- Corrupted files that won’t play back.
- The dash cam “not loop recording” or stopping recording altogether.
Recommended Specs
For your Rexing V1, and really any dash cam, you need a high-endurance microSD card. Look for these specifications:
- Class 10 / UHS-I U1 or U3 speed rating or higher. The “U3” rating is even better, as it indicates a sustained write speed necessary for smooth HD or 4K video recording.
- “High Endurance” designation. Many brands now specifically label cards for dash cam or surveillance camera use, indicating they are designed for continuous read/write cycles.
- Reputable Brands: Stick to well-known brands like Kingston, Samsung, or SanDisk though Rexing specifically advises against SanDisk Ultra cards for their dash cams. There are many counterfeit SD cards out there, especially online, so buying from a reputable retailer is key.
Capacity Considerations
The Rexing V1 can support microSD cards up to 256GB, with some newer models supporting up to 512GB. However, typically, a 32GB or 64GB card is very common for the V1.
Here’s a rough idea of recording times for a single 1080p camera: Rexing M1 Dash Cam Extension Cable: Your Ultimate Guide
- 32GB: Around 2-4 hours of footage before overwriting begins.
- 64GB: Around 4-8 hours of footage.
- 128GB: Approximately 8-12 hours of footage.
- 256GB: Can provide even more, potentially up to 22 hours or more depending on resolution.
While a larger card gives you more footage before the loop starts overwriting, remember that loop recording means it will always eventually overwrite the oldest files. For most people, a 64GB or 128GB card strikes a good balance, giving you ample time to save any critical footage before it’s gone. For those with a Rexing V1, a 128GB card is generally a solid choice.
The Golden Rule: Formatting Your SD Card
This is probably one of the most overlooked, yet crucial, maintenance steps for any dash cam. You should format your microSD card regularly, ideally at least once a month.
Why? Over time, even with loop recording, protected files from G-sensor triggers or manual locks accumulate on the card. This fragmented data can slow down the card, lead to errors, and reduce the effective recording capacity. Formatting essentially wipes the card clean and reorganizes its file structure, allowing your dash cam to record smoothly.
Always format the SD card inside your Rexing V1 dash cam. Formatting on a computer might not always set up the card in the specific way the dash cam expects, leading to issues.
To format: Rexing J1772 Extension: Your Ultimate Guide to Longer EV Charging
- Stop recording press the REC button if the camera is recording.
- Press the MENU button twice to enter the System Settings menu.
- Navigate down to the “Format” option using the arrow buttons.
- Press OK to confirm, then select “Yes” when prompted to delete all data.
Important: Before formatting, always transfer any important locked videos or footage you want to keep to your computer, because formatting will erase everything on the card.
Troubleshooting: When Loop Recording Goes Off-Script
Even with the perfect setup, sometimes your dash cam might act a little wonky. Here are some common issues related to loop recording and how to troubleshoot them:
“Dash cam not loop recording” or stopping recording
If your Rexing V1 stops recording after a few minutes, or you find it’s not actually overwriting old files, the first suspect is almost always the SD card.
- Check Loop Recording Setting: Double-check in the menu that loop recording is actually enabled and set to a duration e.g., 3 minutes, not “Off.”
- Replace SD Card: A common cause for this is a failing or incompatible SD card. Try a new, high-endurance, Class 10/UHS-I or higher microSD card from a reputable brand. This is probably the most effective step.
- Format the SD Card: Even a good card can get corrupted. Format it in-camera monthly.
- Power Supply Issues: Ensure your dash cam is receiving consistent power. The internal battery in the Rexing V1 is only designed for short emergency recordings up to 15 minutes max disconnected operation, not continuous power. It needs to be connected to your car’s power source while driving. A faulty car charger or connection can also cause recording interruptions.
“Card Full” errors
If you’re getting “Card Full” messages even with loop recording on, it usually means you have too many locked files on your SD card. These files are protected from overwriting and will take up space. Jason rexing
- Review and Delete Locked Files: Periodically go through your “RO” or emergency folder on the SD card when connected to a computer and delete any locked videos you no longer need.
- Adjust G-Sensor Sensitivity: If your G-sensor is set too high, it might be locking too many non-critical events. Try lowering the sensitivity to “Medium” or “Low.”
- Format the Card: If you’ve reviewed and deleted what you can but still have issues, a fresh format will clear all files remember to back up!.
Corrupted files or playback issues
Sometimes, videos might appear corrupted, or you can’t play back certain recordings. This can also point to an SD card issue.
- Bad SD Card: As mentioned, a poor-quality or failing SD card can cause data corruption during writing. Try a new, reliable endurance card.
- Firmware Update: Occasionally, firmware bugs can cause recording or file issues. Check the Rexing website for the latest firmware for your V1 model and update if available.
- Factory Reset: As a last resort, performing a factory reset on your dash cam can often resolve software glitches. Make sure to back up any settings you might want to remember!
Pro Tips for Your Rexing V1 Experience
To really make the most of your Rexing V1 dash cam and its loop recording capabilities, here are a few extra tips:
- Mounting it Right: Always mount your Rexing V1 securely on your windshield, ideally behind your rearview mirror. Make sure it doesn’t obstruct your view of the road. Clean the windshield thoroughly before applying the adhesive mount for a strong, lasting bond. A secure mount reduces vibrations, leading to clearer video.
- Constant Power is Key: Remember, your Rexing V1’s internal battery is small and mostly for emergency shutdowns. For continuous recording and loop recording to work reliably, always keep your dash cam plugged into your car’s 12V power outlet using the provided car charger.
- Resolution Matters: Your Rexing V1 records in Full HD 1080p. While higher resolutions can give you more detail, they also create much larger file sizes, which means your SD card will fill up faster and older footage will be overwritten sooner. Stick to the recommended resolution for the best balance of quality and recording time.
- Audio Recording: Your Rexing V1 also records audio inside the cabin. This can be super useful in an incident, capturing conversations or sounds that provide additional context. You can usually toggle this on or off in the settings if you prefer privacy.
By understanding and optimizing these aspects of your Rexing V1, you’re not just buying a dash cam. you’re investing in a reliable eyewitness for all your drives. The loop recording feature, combined with smart SD card management and protective measures, ensures you have continuous, relevant footage whenever you need it, giving you ultimate peace of mind on the road.
Grab 50% OFF on RexingUSA.com Roller Skate Cushions Explained: Your Guide to a Smoother Ride
Frequently Asked Questions
What is loop recording on a dash cam?
Loop recording is a crucial feature that allows your Rexing V1 dash cam to record continuously by automatically overwriting the oldest, unlocked video files on your memory card with new footage once the card is full. This ensures your dash cam never stops recording due to lack of space.
How do I enable loop recording on my Rexing V1?
To enable loop recording, first stop any active recording by pressing the REC button. Then, press the MENU button twice to enter the System Settings menu. Navigate to the “Loop Recording” option, select your desired duration e.g., 1, 2, or 3 minutes, and confirm with the OK button.
What’s the best loop recording time for a Rexing V1?
Rexing often recommends a 3-minute loop recording time. This duration provides a good balance between capturing enough continuous context for an event and keeping individual video file sizes manageable for easier review and transfer. While some dash cams offer 5 or 10-minute options, 3 minutes is typically optimal for the Rexing V1.
How do I save important videos from being overwritten by loop recording?
Your Rexing V1 has two main ways to protect important videos:
- G-Sensor: This automatically detects impacts or sudden movements and locks the current video clip, preventing it from being overwritten.
- Manual Lock: While recording, you can press the OK button to manually lock the current video clip, saving it to a protected folder.
What kind of SD card should I use with my Rexing V1 for loop recording?
You should use a high-endurance microSD card with a Class 10 / UHS-I U1 or U3 speed rating or higher. Look for cards specifically labeled for dash cam or surveillance use from reputable brands like Kingston or Samsung. Avoid standard consumer cards and brands like SanDisk Ultra, as they may not withstand the continuous write cycles of a dash cam. The Rexing V1 supports cards up to 256GB. Rexing Inc. Little Ferry: Your Go-To for Dash Cams, EV Gear, and More!
How often should I format my Rexing V1’s SD card?
It’s highly recommended to format your microSD card at least once a month directly within your Rexing V1 dash cam. This cleans up accumulated protected files, reorganizes the card’s file structure, and helps prevent errors, ensuring smooth and reliable loop recording performance. Remember to back up any important files before formatting!
My Rexing V1 isn’t loop recording, or it stops recording after a few minutes. What should I do?
This is often an SD card issue. First, confirm loop recording is enabled in the settings. Then, try formatting your SD card in-camera. If problems persist, replace your SD card with a new, high-endurance, Class 10/UHS-I or higher card from a reputable brand. Also, ensure your dash cam is receiving continuous power, as the internal battery is only for emergency shutdowns. Checking for and updating to the latest firmware can also resolve some issues.
Leave a Reply